Restraint belts and fixed lanyards for use in Restraint positioning work (where the worker is physically prevented from entering a hazardous area by a fixed harness, belt and lanyard system).
Restraint and Positioning
Products
Ergogrip SK 12
L-0030-1.5
Holding ropes are for getting into the right working position. The core-sheathed ropes used by SKYLOTEC can withstand extreme edge loads, are resistant to abrasion, remain soft in damp conditions and feature a long service life. It is an extremely...
Grillon
2m
Adjustable lanyard fitted with a HOOK connector
For use with a work positioning harness. Designed for hands-free work positioning.
Fitted with a HOOK connector, it can be clipped easily to the harness attachment points.
Auto ...
Komet Stick Run
The Stick-Run is designed to operate on vertical or horizontal ropes for fall arrest and work positioning. It will only slide freely in the up direction (can be pulled down by hand pressure) but locks securely in the event of a fall. A spring-loa...
Rocker
RA003
- Average static load with above rope 3.5kN
- Max dynamic impact with above rope 5.9kN
- Static strength as in the test 15kN for 3mins
- Max dynamic impact with above rope and 200kg 5.7kN
- Weight 169grms<...
Rocker Sling Assembly
1010167
This sling is mainly for use with the Rocker as the flexible extension between the two karabiners as shown.
Categories
©2008 Tag Ltd. All rights reserved.
